- SONY STARVIS SENSOR IMX662-AAQR
- More flexible and powerful ISP
- Frame rate：0.065 – 60 fps
- Video streaming mode, Normal Trigger Mode, Sync Mode(Multi-camera synchronization)
-
Open Source Driver and Application Demo
- On Board IR-CUT Control Circuit
- 2lane MIPI（CSI-2）Interface
- YUV422-8bit UYVY / YUYV format
- 29*29mm Compact Design
- Support Raspberry Pi 3/3B/3B+/4B/Zero/Compute Module
- Support Nvidia Jetson Nano / NX
- Support Rockchip RK35XX
Thechnical Detail
| Thechnical Detail | |
| Sensor | |
| Sensor | SONY IMX662-AAQR-C STARVIS2 |
| Color Type | Color |
| Pixels | 2.07M pixel |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.45 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| Shutter Type | Rolling Shutter |
| SNR1s Value | 0.18 |
| ISP | |
| Frame Rate | 1920*1080@60fps(max) |
| Exposure and Gain | Auto or Manual |
| AE Statistics | Mode Selection：Full Screen、Upper Half、Lower Half |
| White Balance | Auto or Manual |
| Shutter | 1/fps to 1/50,000s |
| Framerate | 0.065 – 60 fps |
| Slow Shutter | Auto Slow Shutter control |
| ISP | sharpening, 2D/3D noise reduction, anti-flicker, lens distortion correction, lens shading correction,defogging, gamma adjustment, and Dynamic Range Compression (DRC) |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror, Test Pattern |
| Monochrome Mode（Day/Night Switch） | Supports Monochrome Mode with IR-CUT filter control |
| Work Mode | |
| Work Mode | Video streaming mode（Free Running）, Normal Trigger Mode, Sync Mode |
| Trigger Source | Hardware，Software |
| Trigger Paramters | Trigger Polarity Control，Trigger Delay |
| Strobe Control | Strobe Output Control，Strobe Delay |
| Auxiliary Functions | |
| MIPI Signal Redriver | Output pre-emphasis and swing control. |
| MIPI Signal Mode | Continuous clock mode , Non-continuous clock mode |
| Chip Temperature | ISP chip junction temperature readout |
| Statistics Function | Frame statistics, Trigger statistics |
| System Management | Unique Device Serial Number,Restore Factory Default Settings,Non-volatile Parameter Storage,Error Code Reporting,Configurable I2C Address |
| Lens Mount Fixing | |
| Mode 1 | 2 screw holes with diameter of 2.05mm,20mm Center-to-Center Spacing |
| Mode 2 | S-MOUNT01,C-MOUNT03 |
| Interface | |
| Connector | 30Pin 0.5mm pitch FPC, up contact |
| I2C | Compatible with 1.8V/3.3V DC |
| Video Data Interface | MIPI CSI-2 Standard，2 Data Lane + 1 Clk LaneUYVY / YUYV format YUV422-8bit Data Type, Bandwidth 1.188Gbps MIPI CSI-2 DC Specifications |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| General | |
| Operating Conditions(Bare PCB) | Performance guarantee temperature：-10℃~60℃, Humidity 95% or less, non-condensingOperating guarantee temperature：-30℃~70℃, Humidity 95% or less, non-condensing |
| Power Supply | 5V DC |
| Power Consumption | Idle state (no image capture): 0.55 W1080p @ 30 fps mode: 1.05 W
1080p @ 60 fps mode: 1.50 W Note: Add 0.6 W upon the IRCUT switching instant. |
| Dimension | Length * width * height = 29*29*11.3 mm |
Spectral Sensitivity Characteristics
Document
Board Dimension
