- Onseim Global Shutter CMOS SENSOR AR0234CSSC
- More flexible and powerful ISP
- Frame rate:1.122 – 60 fps
- Video streaming mode(Free Running), Normal Trigger Mode
-
Open Source Driver and Application Demo
- On Board IR-CUT Control Circuit
- 2lane MIPI(CSI-2)Interface
- YUV422-8bit UYVY / YUYV format
- 29*29mm Compact Design
- Support Raspberry Pi 3/3B/3B+/4B/Zero/Compute Module
- Support Nvidia Jetson Nano / NX
- Support Rockchip RK35XX
Thechnical Detail
| Thechnical Detail | |
| Sensor | |
| Sensor | AR0234CSSC |
| Color Type | Color |
| Pixels | 2.3M pixel |
| Resolution | 1920*1200 |
| Image Size | Diagonal 6.8 mm (Type 1/2.6) |
| Unit Cell Size | 3um (H)*3um(V) |
| Shutter Type | Global Shutter |
| CRA | 0° |
| ISP | |
| Frame Rate | 1920*1200@54fps(max)1920*1080@60fps(max)
1600*1200@60fps(max) |
| Exposure and Gain | Auto or Manual |
| AE Statistics | Mode Selection:Full Screen、Upper Half、Lower Half |
| White Balance | Auto or Manual |
| Shutter | 27.2us to 1/fps |
| Framerate | 1.122 – 60 fps |
| Slow Shutter | Auto Slow Shutter control |
| ISP | sharpening, 2D/3D noise reduction, anti-flicker, lens distortion correction, lens shading correction,defogging, gamma adjustment, and Dynamic Range Compression (DRC) |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Mono Mode(Day/Night Switch) | Supports Monochrome Mode with IR-CUT filter control |
| Work Mode | |
| Work Mode | Video streaming mode(Free Running), Normal Trigger Mode |
| Trigger Source | Hardware,Software |
| Trigger Paramters | Trigger Polarity Control,Trigger Delay |
| Timing Metadata Overlay | Overlay Timing Parameters onto Image (Metadata Overlay on Image) |
| Strobe Control | Strobe Output Control,Strobe Delay |
| Auxiliary Functions | |
| MIPI Signal Redriver | Output pre-emphasis and swing control. |
| MIPI Signal Mode | Continuous clock mode , Non-continuous clock mode |
| Chip Temperature | ISP chip junction temperature, Sensor junction temperature readout |
| Statistics Function | Frame statistics, Trigger statistics |
| System Management | Unique Device Serial Number,Restore Factory Default Settings,Non-volatile Parameter Storage,Error Code Reporting,Configurable I2C Address |
| Lens Mount Fixing | |
| Mode 1 | 2 screw holes with diameter of 2.05mm,20mm Center-to-Center Spacing |
| Mode 2 | S-MOUNT01,C-MOUNT03 |
| Interface | |
| Connector | 30Pin 0.5mm pitch FPC, up contact |
| I2C | Compatible with 1.8V/3.3V DC |
| Video Data Interface | MIPI CSI-2 Standard,2 Data Lane + 1 Clk LaneUYVY / YUYV format YUV422-8bit Data Type, Bandwidth 1.188Gbps MIPI CSI-2 DC Specifications |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| General | |
| Operating Conditions(Bare PCB) | Performance guarantee temperature:-10℃~60℃, Humidity 95% or less, non-condensingOperating guarantee temperature:-30℃~70℃, Humidity 95% or less, non-condensing |
| Power Supply | 5V DC |
| Power Consumption | Idle state (no image capture): 0.55 W1080p @ 30 fps mode: 1.05 W
1080p @ 60 fps mode: 1.50 W Note: Add 0.6 W upon the IRCUT switching instant. |
| Dimension | Length * width * height = 29*29*10.6mm |
Spectral Sensitivity Characteristics
Document
Board Dimension








