CS-MIPI-SC132
  • 1.3M Pixel SmartGS™ CMOS sensor
  • Build in ISP Process
  • Support Raspberry Pi 3/3B/3B+/4B/Zero/Compute Module
  • Support Nvidia Jetson Nano、Nano B01、Xavier NX
  • Global shutter MONO sensor
  • 2lane MIPI（CSI-2）Interface
  • YUV422-8bit UYVY format
  • Supports video stream mode
  • Support trigger mode
AliExpress
Amazon
Technical Details
SENSOR
Sensor SmartSens SmartGS™ SC132GS
Pixels 1.3M pixels
Resolution 1080H*1280V
Image Size 1/4″
Unit Cell Size 2.7um *2.7um
Output Format RAW MONO
Shutter Type Global shutter
ISP
Frame Rate 1280*1080@max45fps，1280*720@max60fps， 640*480@max120fps1080*1280@max45fps， 720*1280@max60fps， 480*640@max120fps
Exposure Auto or Manual
Gain Auto or Manual
Shutter ( 0 – 1 / Frame Rate ) second
Image Setting Brightness, Contrast, Gamma, Flip, Mirror
Image Synchronization mode
Free-Run The sensor runs under an autonomous clock system
Soft Trigger The image is triggered by the DRA（Direct Register Access）
Hardware Trigger The image is triggered by an external trigger signal，Support multi-camera synchronization
Lens
Lens MTV12 / MTV16 / CS
Lens Mount M12*P0.5 / M16*P0.5 / CS
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector 15PIN FPC, Compatible with Raspberry PI，JETSON NANO
Communication Interface IIC, 3.3VDC
Video Data Interface CSI-2 : 2 Data Lane，MIPI CSI-2 DC Specifications
MIPI CLK frequence 297MHz
MIPI Data bandwidth 594Mbps / lane * 2
Data Type YUV422-8bit
General
Operating Conditions(Bare PCB) Performance guarantee temperature：-20℃~60℃, Humidity 95% or less, non-condensing

Operating guarantee temperature： -30℃~85℃, Humidity 95% or less, non-condensing
Power Supply 5VDC / 3.3VDC optional
Power Consumption 1.16W
Dimension 38mm*38mm*12mm(not include lens and lens mount)